type-c/DP转双路MIPI信号转换芯片LT7911D参数特性概述

描述

type-c/DP转双路MIPI信号转换芯片LT7911D方案介绍

MIPI

Description
The LT7911D is a high peRFormance DP1.2 to MIPI®DSI/CSI chip for VR/Smart phone/display application.
For DP1.2 input, LT7911D can be configured as 1,2,4 lane, also support lane swap function. Adaptive equalization makes it suitable for long cable application and the maximum bandwidth is up to 21.6Gbps.
For MIPI®DSI/CSI output, LT7911D features configurable single-port or dual-port or MIPI®DSI/CSI with 1 high-speed clock lane and 1~4 high-speed data lanes operating at maximum 1.5Gb/s/lane, which can support a total bandwidth of up to 12Gbps. LT7911D supports burst mode DSI video data transferring, also support flexible video data mapping path.
With sophisticated MCU and the Embedded  Flash, LT7911D support EDID buffer, DP/eDP input  detection and determine to enter into power saving mode automatically. When the receiver of LT7911D locks the input signal, MCU can read the recovered timing parameters by MSA registers to match the ASSR. The DPCD registers are accessible via system I2C when debugging the full link training. Once the fast link training used, system time will save at least 400ms.

2. Features
• Type-C
• DP/eDP Receiver
• Single/Dual-Port LVDS Transmitter
• Miscellaneous

3. Applications
• Mobile system
• VR
 

MIPI
打开APP阅读更多精彩内容
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉

全部0条评论

快来发表一下你的评论吧 !

×
20
完善资料,
赚取积分