分享资料个
The ISL8483E and ISL8485E are ESD protected， BiCMOS 5V powered， single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Each driver output/receiver input is protected against ±15kV ESD strikes， without latch-up. Unlike competitive devices， this Intersil family is specified for 10% tolerance supplies （4.5V to 5.5V）。 The ISL8483E uses slew rate limited drivers which reduce EMI and minimize reflections from improperly terminated transmission lines or unterminated stubs in multidrop and multipoint applications. Data rates up to 10Mbps are achievable by using the ISL8485E， which features higher slew rates. Both devices present a “single unit load” to the RS-485 bus， which allows up to 32 transceivers on the network. Receiver （Rx） inputs feature a “fail-safe if open” design， which ensures a logic high Rx output if Rx inputs are floating. Driver （Tx） outputs are short-circuit protected， even for voltages exceeding the power supply voltage. Additionally， on-chip thermal shutdown circuitry disables the Tx outputs to prevent damage if power dissipation becomes excessive. These half duplex configurations multiplex the Rx inputs and Tx outputs to allow transceivers with Rx and Tx disable functions in 8 Ld packages.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !
