The SGM8541 (single) ,SGM8542 (dual) and SGM8544
(quad) are rail-to-rail input and output voltage
feedback amplifiers offering low cost. They have a
wide input common-mode voltage range and output
voltage swing, and take the minimum operating
supply voltage down to 2.1V and the maximum
recommended supply voltage is 5.5 V. All are specified
over the extended –40°C to +125°C temperature range.
The SGM8541/8542/8544 provide 1.1MHz bandwidth at
a low current consumption of 42µA per amplifier. Very
low input bias currents of 0.5pA, enable SGM8541/8542
/8544 to be used for integrators, photodiode amplifiers,
and piezoelectric sensors. Rail-to-rail inputs and
outputs are useful to designers buffering ASIC in
single-supply systems.
Applications for this amplifiers include safety monitoring, portable equipment, battery and power supply
control, and signal conditioning and interfacing for
transducers in very low power systems.
The SGM8541 is available in the tiny SOT23-5 and SO-8
packages. The SGM8542 comes in the miniature SO-8
and MSOP-8 packages. The SGM8544 is offered in
TSSOP-16 and SO-16 packages.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部1条评论
快来发表一下你的评论吧 !