分享资料个
The CAP1208 is a multiple channel capacitive touch sensor controller. It contains eight （8） individual capacitive touch sensor inputs with programmable sensitivity for use in touch sensor applications. Each sensor input is calibrated to compensate for system parasitic capacitance and automatically recalibrated to compensate for gradual environmental changes. The CAP1208 includes Multiple Pattern Touch recognition that allows the user to select a specific set of buttons to be touched simultaneously. If this pattern is detected， a status bit is set and an interrupt is generated. The CAP1208 has Active and Standby states， each with its own sensor input configuration controls. Power consumption in the Standby state is dependent on the number of sensor inputs enabled as well as averaging， sampling time， and cycle time. Deep Sleep is the lowest power state available， drawing 5μA （typical） of current. In this state， no sensor inputs are active， and communications will wake the device.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !
