分享资料个
The AD7466-KGD1 are 12-bit， high speed， low power， successive approximation analog-to-digital converter （ADC）。 The part operates from a single 1.6 V to 3.6 V power supply and features throughput rates up to 200 kSPS with low power dissipation. The part contains a low noise， wide bandwidth track-and-hold amplifier， which can handle input frequencies in excess of 3 MHz. The conversion process and data acquisition are controlled using CS and the serial clock， allowing the device to interface with microprocessors or DSPs. The input signal is sampled on the falling edge of CS， and the conversion is also initiated at this point. There are no pipeline delays associated with the part. The reference for the part is taken internally from VDD. This allows the widest dynamic input range to the ADC. Thus， the analog input range for the part is 0 V to VDD. The conversion rate is determined by the SCLK.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !
