分享资料个
The AD5231 is a nonvolatile memory1 ， digitally controlled potentiometer2 with 1024-step resolution. The device performs the same electronic adjustment function as a mechanical potentiometer with enhanced resolution， solid state reliability， and remote controllability. The AD5231 has versatile programming that uses a standard 3-wire serial interface for 16 modes of operation and adjustment， including scratchpad programming， memory storing and restoring， increment/decrement， ±6 dB/step log taper adjustment， wiper setting readback， and extra EEMEM for user-defined information， such as memory data for other components， look-up table， or system identification information. In scratchpad programming mode， a specific setting can be programmed directly to the RDAC register that sets the resistance between Terminals W–A and Terminals W–B. This setting can be stored into the EEMEM and is transferred automatically to the RDAC register during system power-on. The EEMEM content can be restored dynamically or through external PR strobing， and a WP function protects EEMEM contents. To simplify the programming， the linear-step increment or decrement commands can be used to move the RDAC wiper up or down， one step at a time. The ±6 dB step commands can be used to double or half the RDAC wiper setting. The AD5231 is available in a 16-lead TSSOP. The part is guaranteed to operate over the extended industrial temperature range of −40°C to +85°C.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !
