分享资料个
The AD5232 device provides a nonvolatile， dual-channel， digitally controlled variable resistor （VR） with 256-position resolution. This device performs the same electronic adjustment function as a mechanical potentiometer with enhanced resolution， solid state reliability， and superior low temperature coefficient performance. The versatile programming of the AD5232， perormed via a microcontroller， allows multiple modes of operation and adjustment. In the direct program mode， a predetermined setting of the RDAC registers （RDAC1 and RDAC2） can be loaded directly from the microcontroller. Another important mode of operation allows the RDACx register to be refreshed with the setting previously stored in the corresponding EEMEM register （EEMEM1 and EEMEM2）。 When changes are made to the RDACx register to establish a new wiper position， the value of the setting can be saved into the EEMEMx register by executing an EEMEM save operation. After the settings are saved in the EEMEMx register， these values are automatically transferred to the RDACx register to set the wiper position at system power-on. Such operation is enabled by the internal preset strobe. The preset strobe can also be accessed externally.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !
