分享资料个
The AD9958 consists of two DDS cores that provide independent frequency， phase， and amplitude control on each channel. This flexibility can be used to correct imbalances between signals due to analog processing， such as filtering， amplification， or PCB layout related mismatches. Because both channels share a common system clock， they are inherently synchronized. Synchronization of multiple devices is supported. The AD9958 can perform up to a 16-level modulation of frequency， phase， or amplitude （FSK， PSK， ASK）。 Modulation is performed by applying data to the profile pins. In addition， the AD9958 also supports linear sweep of frequency， phase， or amplitude for applications such as radar and instrumentation. The AD9958 serial I/O port offers multiple configurations to provide significant flexibility. The serial I/O port offers an SPIcompatible mode of operation that is virtually identical to the SPI operation found in earlier Analog Devices， Inc.， DDS products. Flexibility is provided by four data pins （SDIO_0/ SDIO_1/SDIO_2/SDIO_3） that allow four programmable modes of serial I/O operation. The AD9958 uses advanced DDS technology that provides low power dissipation with high performance. The device incorporates two integrated， high speed 10-bit DACs with excellent wideband and narrow-band SFDR. Each channel has a dedicated 32-bit frequency tuning word， 14 bits of phase offset， and a 10-bit output scale multiplier.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !
