The TB67S109A is a two-phase bipolar stepping motor driver using a PWM chopper. The clock in decoder is built in. Fabricated with the BiCD process, rating is 50 V/4.0 A 。
・BiCD process integrated monolithic IC. ・Capable of controlling 1 bipolar stepping motor. ・PWM controlled constant-current drive. ・Allows full, half, quarter, 1/8, 1/16, 1/32 step operation. ・Low on-resistance (High + Low side=0.49Ω(typ.)) MOSFET output stage. ・High efficiency motor current control mechanism (Advanced Dynamic Mixed Decay) ・High voltage and current (For specification, please refer to absolute maximum ratings and operation ranges) ・Error detection (TSD/ISD) signal output function ・Built-in error detection circuits (Thermal shutdown (TSD)、over-current shutdown (ISD), and power-on reset (POR)) ・Built-in VCC regulator for internal circuit use. ・Chopping frequency of a motor can be customized by external resistance and capacitor. ・Multi package lineup TB67S109AFNAG: HSSOP36 Note) Please be careful about thermal conditions during use.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部1条评论
快来发表一下你的评论吧 !