The ADP190/ADP191 are high-side load switches designed for operation from 1.1 V to 3.6 V. These load switchs provide power domain isolation for extended power battery life. The devices contain a low on-resistance P-channel MOSFET that supports more than 500 mA of continuous current and minimizes power loss. The low 2 μA (maximum) of ground current and ultralow shutdown current make the ADP190/ADP191 ideal for battery-operated portable equipment. The built-in level shifter for enable logic makes the ADP190/ADP191 compatible with modern processors and GPIO controllers
The ADP191 controls the turn-on slew rate of the switch to reduce the input inrush current. The ADP191 also incorporates an internal output discharge resistor to discharge the output capacitance when the ADP191 output is disabled.
Beyond operating performance, the ADP190/ADP191 occupy minimal printed circuit board (PCB) space with an area less than 0.64 mm2 and a height of 0.60 mm. It is available in an ultrasmall 0.8 mm × 0.8 mm, 4-ball, 0.4 mm pitch WLCSP.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !