The ADM696/ADM697 supervisory circuits offer complete single chip solutions for power supply monitoring and battery control functions in microprocessor systems. These functions include µP reset, backup-battery switchover, watchdog timer, CMOS RAM write protection, and power failure warning. The ADM696/ADM697 are available in 16-pin DIP and small outline packages and provide the following functions: 1. Power-On Reset output during power-up, power-down and brownout conditions. The RESET voltage threshold is adjustable using an external voltage divider. The RESET output remains operational with VCC as low as 1 V. 2. A Reset pulse if the optional watchdog timer has not been toggled within specified time. 3. Separate watchdog time-out and low line status outputs. 4. Adjustable reset and watchdog timeout periods. 5. A 1.3 V threshold detector for power fail warning, low battery detection, or to monitor a power supply other than VCC. 6. Battery backup switching for CMOS RAM, CMOS microprocessor or other low power logic (ADM696)。 7. Write protection of CMOS RAM or EEPROM (ADM697)..
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !