×

教程第3部分：带有OV7670摄像头模块的TinyML

消耗积分:2 | 格式:zip | 大小:0.32 MB | 2022-10-24

陈文博

分享资料个

描述

这是我在 TensorFlow 下使用 Google Summer of Code (GSoC) 的第二个项目。互联网上没有合适的文档来构建自定义图像识别 TinyML 模型，所以我的 GSoC 导师 Paul Ruiz 建议我应该尝试解决它。下面介绍了如何构建图像识别 TinyML 应用程序。快乐修补！

项目背后的理念：

我想解决变量较少的问题，因为有关如何使用相机模块和处理其数据的文档不是很好。我选择构建一个 MNIST TinyML 模型，因为在这种情况下，我不需要担心训练数据集，它可以让我专注于项目的基本部分来启动和运行。但是，既然我已经弄清楚了构建自定义图像识别项目的所有部分，我已经记录了如何使用相机模块收集训练数据集。

博客的主题/基调？

我想警告你，这个博客可能会有点难以理解。对此有一个正确的解释：使用基于加速度计的应用程序，只需在串行监视器或绘图仪上打印出一个轴的加速度计值，就可以很容易地进行完整性检查。相比之下，对图像识别应用程序进行健全性检查至少要麻烦 10 倍，因为无法实时可视化检查一段代码是否正在执行所需的操作。

一些评论

由于单元测试的复杂性，这个博客可能有点难以理解。我想通过读者的反馈来解决解释中的任何空白。因此，请在下面评论您对嵌入式系统图像识别相关的任何疑问和问题。

TinyML 是否有意义？

我建议您阅读TinyML 书的作者 Pete Warden 撰写的这篇精彩文章，以了解为什么在微控制器上运行机器学习模型是有意义的，并且是机器学习的未来。

即使 TinyML 有意义，图像识别在 TinyML 上有意义吗？

我们将在这里使用的 OV7670 相机的完整 VGA（640×480 分辨率）输出对于当前的 TinyML 应用程序来说太大了。uTensor 通过使用 28×28 图像的 MNIST 运行笔迹检测。TensorFlow Lite for Microcontrollers 示例中的人员检测示例使用 96×96，这绰绰有余。即使是最先进的“Big ML”应用程序通常也只使用 320×320 的图像。总之，在微型微控制器上运行图像识别应用程序很有意义

pYYBAGNViv2ASn55AAA2nUNRclw057.png
 

本教程简而言之：

  • 集成摄像头和 LCD 模块
  • 构建 MNIST TinyML 模型
  • 测试 TinyML 模型
  • 结论
poYBAGNViwCAWVS0AAPnOtvS72s521.png
 

8.集成摄像头和液晶模组

8.a TFT+OV7670：显示测试

本小节的 Github 链接

代码说明：

tft.fillScreen(ST77XX_BLACK);

这行代码用黑色填充屏幕。

for(int i =0; i<28;i++){
    for(int j =0;j<28;j++){
      tft.drawPixel(i,j,ST77XX_GREEN);
      delay(0);
    }
  }
  delay(1000);

这些代码行绘制了一个 28x28 的绿色块。

草图：

#include     // Core graphics library
#include  // Hardware-specific library for ST7735
#include 


  // For the breakout board, you can use any 2 or 3 pins.
  // These pins will also work for the 1.8" TFT shield.
  #define TFT_CS        A7
  #define TFT_RST        7 // Or set to -1 and connect to Arduino RESET pin
  #define TFT_DC         A6

// For 1.44" and 1.8" TFT with ST7735 use:
Adafruit_ST7735 tft = Adafruit_ST7735(TFT_CS, TFT_DC, TFT_RST);
#include 

uint16_t pixels[176 *144];
uint16_t color;
uint8_t red, blue, green;

void setup(void) {
  Serial.begin(9600);

  // Use this initializer if using a 1.8" TFT screen:
  tft.initR(INITR_BLACKTAB); 
  delay(1000);// Init ST7735S chip, black tab
  Serial.println(F("Initialized"));
 
  if (!Camera.begin(QCIF, RGB565, 1)) {
    Serial.println("Failed to initialize camera!");
    while (1);
  }
  Serial.println(F("Initialized"));
  


  // large block of text
  tft.fillScreen(ST77XX_BLACK);
  
  
}

void loop() {
  for(int i =0; i<28;i++){
    for(int j =0;j<28;j++){
      tft.drawPixel(i,j,ST77XX_GREEN);
      delay(0);
    }
  }
  delay(1000);
 tft.fillScreen(ST77XX_BLACK);
}
poYBAGNVi7yAawKtAAA6lisAnyI973.png
 

8.b TFT + OV7670：静态图像测试

本小节的 Github 链接。

现在我们已经知道如何显示绿色块，让我们从存储的 HEX 值数组中显示图像。

代码说明：

uint16_t pixels[176 * 144]= {0x0D2A,0xED29,0xED29,0xED29,.....0x95B5,0xB6B5,0xB6B5};

该数组存储所有像素的十六进制值。

for(int i =0; i<50;i++){
    for(int j =0;j<50;j++){
       pixel = pixels[176*i +j];
       tft.drawPixel(i,j,pixel);
}
}

这些代码行通过阵列循环并在 TFT LCD 显示器上绘制图像。

草图：

#include     // Core graphics library
#include  // Hardware-specific library for ST7735
#include 

  #define TFT_CS        A7
  #define TFT_RST        7 // Or set to -1 and connect to Arduino RESET pin
  #define TFT_DC         A6


Adafruit_ST7735 tft = Adafruit_ST7735(TFT_CS, TFT_DC, TFT_RST);

uint16_t pixels[176 * 144]= {0x0D2A,0xED29,0xED29,0xED29,.....0x95B5,0xB6B5,0xB6B5};

uint16_t color, pixel;
uint8_t red, blue, green;

void setup() {
  Serial.begin(9600);
  while (!Serial)
    delay(10);
 // Serial.print(F("Hello! ST77xx TFT Test"));
  tft.initR(INITR_BLACKTAB); 
  delay(1000);
  // large block of text
  tft.fillScreen(ST77XX_BLACK);
  
  
}

void loop() {
  for(int i =0; i<50;i++){
    for(int j =0;j<50;j++){
       pixel = pixels[176*i +j];
        red   = ((pixel >> 11) & 0x1f) << 3;
        green = ((pixel >> 5) & 0x3f) << 2; 
       blue  = ((pixel >> 0) & 0x1f) << 3; 
      color = tft.color565(red+50, green+50, blue+50);
      Serial.print(red);
      Serial.print(", ");
      Serial.print(green);
      Serial.print(", ");
      Serial.println(blue); 
      tft.drawPixel(i,j,color);
      delay(0);
    }
  }
  delay(100);
  //tft.fillScreen(ST77XX_BLACK);
}
pYYBAGNVi7-AOavGAACbnmaU4qY29.jpeg
 

8.c TFT + OV7670：Liveimagetest

本小节的 Github 链接。

现在我们已经知道如何从存储的 HEX 值数组中显示图像，让我们扩展它以显示实时图像。

代码说明：

uint16_t pixels[176 * 144];

这行代码声明了一个数组来存储从相机捕获的图像。

Camera.readFrame(pixels);

这行代码从相机读取一帧并将其存储在像素数组中。

for (int i = 0; i < 112; i++) 
{
   for(int j = 0; j < 112; j++)
   {
      uint16_t pixel = pixels[176*i +j];
      tft.drawPixel(i,j,pixel);
   }
}

这些代码行遍历像素阵列并在 TFT LCD 显示器上绘制图像。

草图：

/*
  OV767X - Camera Test Pattern

  This sketch waits for the letter 'c' on the Serial Monitor,
  it then reads a frame from the OmniVision OV7670 camera and 
  prints the data to the Serial Monitor as a hex string.

  The website https://rawpixels.net - can be used the visualize the data:
    width: 176
    height: 144
    RGB565
    Little Endian

  Circuit:
    - Arduino Nano 33 BLE board
    - OV7670 camera module:
      - 3.3 connected to 3.3
      - GND connected GND
      - SIOC connected to A5
      - SIOD connected to A4
      - VSYNC connected to 8
      - HREF connected to A1
      - PCLK connected to A0
      - XCLK connected to 9
      - D7 connected to 4
      - D6 connected to 6
      - D5 connected to 5
      - D4 connected to 3
      - D3 connected to 2
      - D2 connected to 0 / RX
      - D1 connected to 1 / TX
      - D0 connected to 10

  This example code is in the public domain.
*/

#include 
#include     // Core graphics library
#include  // Hardware-specific library for ST7735
#include 

#define TFT_CS        A7
  #define TFT_RST        7 // Or set to -1 and connect to Arduino RESET pin
  #define TFT_DC         A6


Adafruit_ST7735 tft = Adafruit_ST7735(TFT_CS, TFT_DC, TFT_RST);

uint16_t pixels[176 * 144];
void setup() {
  Serial.begin(9600);
  while (!Serial);

  Serial.println("OV767X Camera Capture");
  Serial.println();

  tft.initR(INITR_BLACKTAB); 
  delay(1000);
  
  if (!Camera.begin(QCIF, RGB565, 1)) {
    Serial.println("Failed to initialize camera!");
    while (1);
  }

  Serial.println("Camera settings:");
  Serial.print("\twidth = ");
  Serial.println(Camera.width());
  Serial.print("\theight = ");
  Serial.println(Camera.height());
  Serial.print("\tbits per pixel = ");
  Serial.println(Camera.bitsPerPixel());
  Serial.println();

  Serial.println("Send the 'c' character to read a frame ...");
  Serial.println();
}

void loop() {
    Serial.println("Reading frame");
    Serial.println();
    Camera.readFrame(pixels);
    tft.fillScreen(ST77XX_BLACK);
    for (int i = 0; i < 112; i++) {
      for(int j = 0; j < 112; j++){
       uint16_t pixel = pixels[176*i +j];
       int red   = ((pixel >> 11) & 0x1f) << 3;
       int green = ((pixel >> 5) & 0x3f) << 2; 
       int blue  = ((pixel >> 0) & 0x1f) << 3; 
      
      Serial.println(red);
      Serial.println(green);
      Serial.println(blue);
      tft.drawPixel(i,j,pixels[176*i+j]);
      }
    }
    delay(2000);
}
 
poYBAGNVi6iARQDcAADDLPEVC4M03.jpeg
 
pYYBAGNVi8SAe8zUAAETLEeYkhk54.jpeg
 
poYBAGNVi8aABNhyAAC0xK3ar3A172.png
 

9. 构建 MNIST TinyML 模型

注意：如果您是 TensorFlow 或 TinyML 的新手，我强烈建议您通读这篇TinyML 简介博客，以便在深入了解本节之前很好地掌握这些概念。

现在我们已经让相机和显示器工作并集成了，让我们构建机器学习模型来识别数字。

9.a 探索 Colab 笔记本

本小节的 Github 链接。

代码说明：

import numpy as np                   # advanced math library
import matplotlib.pyplot as plt      # MATLAB like plotting routines
import random                        # for generating random numbers

from keras.datasets import mnist     # MNIST dataset is included in Keras
from keras.models import Sequential  # Model type to be used

from keras.layers.core import Dense, Dropout, Activation # Types of layers to be used in our model
from keras.utils import np_utils                         # NumPy related tools
import tensorflow as tf

tf.config.run_functions_eagerly(True)

这些代码行导入必要的库来构建和可视化我们的模型。

(X_train, y_train), (X_test, y_test) = mnist.load_data()
print("X_train shape", X_train.shape)
print("y_train shape", y_train.shape)
print("X_test shape", X_test.shape)
print("y_test shape", y_test.shape)

>>X_train shape (60000, 28, 28)
>>y_train shape (60000,)
>>X_test shape (10000, 28, 28)
>>y_test shape (10000,)

这些代码行加载 MNIST 测试并将图像训练到正确的变量中。

plt.rcParams['figure.figsize'] = (9,9) # Make the figures a bit bigger

for i in range(9):
    plt.subplot(3,3,i+1)
    num = random.randint(0, len(X_train))
    plt.imshow(X_train[num], cmap='gray', interpolation='none')
    plt.title("Class {}".format(y_train[num]))
    
plt.tight_layout()
pYYBAGNVi8iAHxfoAAC79oLd2Mw677.png
来自 MNIST 数据集的一些图像
 

这些代码行从 MNIST 数据集的训练数据中可视化了九个不同的图像。

def matprint(mat, fmt="g"):
    col_maxes = [max([len(("{:"+fmt+"}").format(x)) for x in col]) for col in mat.T]
    for x in mat:
        for i, y in enumerate(x):
            print(("{:"+str(col_maxes[i])+fmt+"}").format(y), end=",")
        print("")
     
matprint(X_train[num])
poYBAGNVi8uAGoigAAFAw16Pa1A213.png
 

这些代码行将训练数据中的随机图像显示为值数组。

from keras.preprocessing.image import ImageDataGenerator
from keras.layers import Conv2D, MaxPooling2D, ZeroPadding2D, GlobalAveragePooling2D, Flatten
from keras.layers import BatchNormalization

这些代码行导入必要的层来构建机器学习模型。

# Again, do some formatting
# Except we do not flatten each image into a 784-length vector because we want to perform convolutions first

X_train = X_train.reshape(60000, 28, 28, 1) #add an additional dimension to represent the single-channel
X_test = X_test.reshape(10000, 28, 28, 1)

X_train = X_train.astype('float32')         # change integers to 32-bit floating point numbers
X_test = X_test.astype('float32')

#X_train /= 255                              # normalize each value for each pixel for the entire vector for each input
#X_test /= 255

print("Training matrix shape", X_train.shape)
print("Testing matrix shape", X_test.shape)

这些代码行对训练和测试数据进行预处理以使其正常工作，例如：标准化、Float64 到 Float32 的转换和重塑。

# one-hot format classes

nb_classes = 10 # number of unique digits

Y_train = np_utils.to_categorical(y_train, nb_classes)
Y_test = np_utils.to_categorical(y_test, nb_classes)

这些代码行 one-hot 对训练和测试图像的标签进行编码。

from keras.layers.convolutional import DepthwiseConv2D
from keras.backend import relu
from keras.activations import softmax
model = Sequential()                                 # Linear stacking of layers

model.add(DepthwiseConv2D((3,3),input_shape=(28,28,1)))
# Convolution Layer 1
model.add(Conv2D(2, (3, 3)))      # 2 different 3x3 kernels -- so 2 feature maps
model.add(BatchNormalization(axis=-1))               # normalize each feature map before activation
convLayer1 = Activation('relu')                     # activation
model.add(convLayer1)

# Convolution Layer 2
model.add(Conv2D(2, (3, 3)))                        # 2 different 3x3 kernels -- so 2 feature maps
model.add(BatchNormalization(axis=-1))               # normalize each feature map before activation
model.add(Activation('relu'))                        # activation
convLayer2 = MaxPooling2D(pool_size=(2,2))          # Pool the max values over a 2x2 kernel
model.add(convLayer2)

# Convolution Layer 3
model.add(Conv2D(4,(3, 3)))                         # 4 different 3x3 kernels -- so 4 feature maps
model.add(BatchNormalization(axis=-1))               # normalize each feature map before activation
convLayer3 = Activation('relu')                     # activation
model.add(convLayer3)

# Convolution Layer 4
model.add(Conv2D(4, (3, 3)))                        # 4 different 3x3 kernels -- so 64 feature maps
model.add(BatchNormalization(axis=-1))               # normalize each feature map before activation
model.add(Activation('relu'))                        # activation
convLayer4 = MaxPooling2D(pool_size=(2,2))          # Pool the max values over a 2x2 kernel
model.add(convLayer4)

model.add(Flatten())                                 
model.add(Dense(5,activation = relu))                           
model.add(Dense(10, activation = softmax))

这些代码行定义了机器学习模型中的实际层。

model.summary()

这行代码向用户显示有关模型架构的信息。

model.compile(loss='categorical_crossentropy', optimizer='adam', metrics=['accuracy'])

这行代码定义了机器学习模型在训练时要使用的损失、优化器和其他指标。

history = model.fit(X_train,Y_train, steps_per_epoch=60000//128, epochs=3, verbose=1, 
                    validation_data=(X_test,Y_test))

这行代码训练机器学习模型。

score = model.evaluate(X_test, Y_test)
print('Test score:', score[0])
print('Test accuracy:', score[1])

这些代码行评估机器学习模型并将准确性和分数打印给用户。

!apt-get -qq install xxd
converter = tf.lite.TFLiteConverter.from_keras_model(model)
tflite_model = converter.convert()

# Save the model to disk
open("gesture_model.tflite", "wb").write(tflite_model)
  
import os
basic_model_size = os.path.getsize("gesture_model.tflite")
print("Model is %d bytes" % basic_model_size)

这些代码行将 TensorFlow 模型转换为 TensorFlow Lite 模型。

!echo "const unsigned char model[] = {" > /content/model.h
!cat gesture_model.tflite | xxd -i      >> /content/model.h
!echo "};"                              >> /content/model.h

import os
model_h_size = os.path.getsize("model.h")
print(f"Header file, model.h, is {model_h_size:,} bytes.")
print("\nOpen the side panel (refresh if needed). Double click model.h to download the file.")

这些代码行将 TensorFlow Lite 模型转换为 C 文件以供微控制器使用。

pYYBAGNVi82AK_ieAAAfDoqsT64558.png
 

现在我们已经构建并训练了我们的模型，我们现在需要弄清楚如何将数据从相机发送到 TinyML 模型。

相机的输出尺寸为 176x144，模型的输入尺寸为 28x28。我们可以尝试两种方法：

  • 1. 从相机的输出中裁剪出 28x28 的图像。
  • 2. 从相机的输出中裁剪出 128x128 的图像并将其重新整形为 28x28

我们将在以下部分尝试这两种方法。

9.b OV7670：作物测试

本小节的 Github 链接。

代码说明：

uint16_t pixels[176 * 144]= {0x0D2A,0xED29,0xED29,0xED29,....,0xB5AD,0x95B5,0xB6B5,0xB6B5};

这行代码将 HEX 值存储在大小为 176X144 的数组中。

for(int a = 0; a< 112; a++)
   {
    for(int b = 0; b< 112; b++)
    {
      Serial.print( pixels[176*a +b]);
      Serial.print(", ");
    }
    Serial.println("");
   }

这些代码行遍历数组并打印出图像的前 28x28 像素。

草图：

/*
  OV767X - Camera Test Pattern

  This sketch waits for the letter 'c' on the Serial Monitor,
  it then reads a frame from the OmniVision OV7670 camera and 
  prints the data to the Serial Monitor as a hex string.

  The website https://rawpixels.net - can be used the visualize the data:
    width: 176
    height: 144
    RGB565
    Little Endian

  Circuit:
    - Arduino Nano 33 BLE board
    - OV7670 camera module:
      - 3.3 connected to 3.3
      - GND connected GND
      - SIOC connected to A5
      - SIOD connected to A4
      - VSYNC connected to 8
      - HREF connected to A1
      - PCLK connected to A0
      - XCLK connected to 9
      - D7 connected to 4
      - D6 connected to 6
      - D5 connected to 5
      - D4 connected to 3
      - D3 connected to 2
      - D2 connected to 0 / RX
      - D1 connected to 1 / TX
      - D0 connected to 10

  This example code is in the public domain.
*/

#include <Arduino_OV767X.h>

uint16_t pixels[176 * 144]= {0x0D2A,0xED29,0xED29,0xED29,....,0xB5AD,0x95B5,0xB6B5,0xB6B5};
int arr1[28*28];
void setup() {
  Serial.begin(9600);
  while (!Serial);

  Serial.println("OV767X Camera Capture");
  Serial.println();
  Serial.println("Send the 'c' character to read a frame ...");
  Serial.println();
}

void loop() {
  if (Serial.read() == 'c') {
    
    for(int a =0; a< 112; a++)
   {
    for(int b =0; b< 112; b++)
    {
      Serial.print( pixels[176*a +b]);
      Serial.print(", ");
    }
    Serial.println("");
   }
   Serial.println("");
  }
}
poYBAGNVi9CAZzBLAAB8iBb1xMQ572.png
原始图像
 
poYBAGNVi9KANLtRAAALcPH2w9k316.png
28x28 裁剪图像
 

9.c OV7670：重塑测试

本小节的 Github 链接。

代码说明：

for(int i=0; i < 28; i++){
    for(int j=0; j< 28; j++){
      int sum =0;

     for(int k =0; k<4;k++){
      for(int l =0; l<4; l++){
        sum += arr[4*(112*i+j) + 112 * k + l];
      }
     }
      sum = sum /16;
      arr1[i*28+j] = sum;
      Serial.print(sum);
     Serial.print(", ");
    }
    Serial.println("");
  }

Serial.println("");

这些代码行使用 4x4 池化内核，步长为 1，遍历 112x112 2D 数组以输出 28x28 图像。

pYYBAGNVi9SAassDAAA0c2AxMJQ057.png
 

草图：

#include "num.h"
float arr1[28 * 28];
int filterWidth = 4;
int filterheight = 4;
void setup() {
  Serial.begin(9600);
  
  
}

void loop() {
  // put your main code here, to run repeatedly:
  for(int i=0; i < 28; i++){
    for(int j=0; j< 28; j++){
      int sum =0;

     for(int k =0; k<4;k++){
      for(int l =0; l<4; l++){
        sum += arr[4*(112*i+j) + 112 * k + l];
      }
     }
      sum = sum /16;
      arr1[i*28+j] = sum;
      Serial.print(sum);
     Serial.print(", ");
    }
    Serial.println("");
  }

Serial.println("");
 
}
pYYBAGNVi9aANlPUAAAM1s12O10322.png
原始图像：28x28
 
poYBAGNVi9iAf9O7AAArthVe9YI897.png
用 python 放大：112x112
 
pYYBAGNVi9qALyycAAANA2EmkbI439.png
使用 Arduino 缩小尺寸：28x28
 

9.d 探索 reshape.ipynb Colab 笔记本

本小节的 Github 链接。

代码说明：

from skimage.transform import resize
t = number28.reshape(28,28)
print(t.shape)
number112 = resize(t, (112, 112))
print(number112.dtype)
"""
for i in range(0,112):
  for j in range(0,112):
    if number112[i][j] < 10e-20:
      number112[i][j] = 0
      /
"""
for i in range(0,112):
  for j in range(0,112):
      number112[i][j] = number112[i][j] * 10e+19
      if number112[i][j] < 10:
       number112[i][j] = 0
np.amax(number112)
number112 = number112 /12
np.amax(number112)
plt.imshow(number112, cmap='gray', interpolation='none')
plt.imshow(t, cmap='gray', interpolation='none')

这些代码行将 28X28 MNIST 图像放大为 112X112 图像。

def matprint(mat, fmt="g"):
    col_maxes = [max([len(("{:"+fmt+"}").format(x)) for x in col]) for col in mat.T]
    for x in mat:
        for i, y in enumerate(x):
            print(("{:"+str(col_maxes[i])+fmt+"}").format(y), end=",")
        print("")
matprint(number112)

这些代码行打印放大的 112X112 MNIST 图像。

number28new = number28new.reshape(28,28)
for i in range(0,28):
  for j in range(0,28):
      if number28new[i][j] < 35:
       number28new[i][j] = 0
plt.imshow(number28new, cmap='gray', interpolation='none')

这些代码行打印重新整形的 28x28 MNIST 图像。

poYBAGNVi92Aa3rVAABDaLd-59g427.png
原图：112x112
 
pYYBAGNVi9-AKig_AAAT0WT-r04351.png
缩小图像：28x28
 
poYBAGNVi-GATG-mAACWlp4hVHg595.png
 

10. 测试 TinyML 模型

现在我们已经构建了一个 TinyML 模型并测试了将数据输入模型的两种方法，是时候将 TinyML 模型集成到主应用程序中了。

10.a TinyML 模型：输入测试

本小节的 Github 链接。

我们如何发送输入数据？

对于基于时间序列的模型，很明显发送输入数据是因为输入张量是一维数组。

//1D input tensor
tflInputTensor->data.f[i * 3 + 0] = (ax + 8.0) / 16.0;
tflInputTensor->data.f[i * 3 + 1] = (ay + 8.0) / 16.0;
tflInputTensor->data.f[i * 3 + 2] = (az + 8.0) / 16.0;

我不知道如何将数据发送到这个特定的 TinyML 模型，所以我设计了一个测试。

我将 MNIST 训练数据的数组值存储到 num.h 文件中。

数小时：

float num[784] = {0,0,0,0,0,0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,  0, 49,143,223,196,149, 73,  0,  0,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,126,228,252,257,252,248,242,193, 67,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,176,247,254,213,156,149,175,236,256,204, 53,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,119,246,248,156,  0,  0,  0,  0, 69,216,259,221, 50,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,166,246,160,  0,  0,  0,  0,  0,  0,107,225,259,177,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,115,229,234, 86,  0,  0,  0,  0,  0,  0,  0,142,252,209,0,0,0,0,0,0,
0,0,0,0,0,0,107,223,230,214,237,192, 50,  0,  0,  0,  0,  0,  0,124,245,186,0,0,0,0,0,0,
0,0,0,0,0,0,201,251,147, 44, 95,154,127,  0,  0,  0,  0,  0,116,224,235, 91,0,0,0,0,0,0,
0,0,0,0,0,0,192,254,178, 89,  0,  0,  0,  0,  0,  0,  0, 80,224,242,149,  0,0,0,0,0,0,0,
0,0,0,0,0,0, 67,227,256,244,190, 94,  0,  0,  0,  0, 82,218,248,163,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0, 91,210,245,244,227,184, 90,  0, 84,219,256,188, 38,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0, 76,114,127,201,234,231,244,263,218, 74,  0,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,  0, 47,205,266,273,250, 92,  0,  0,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,  0, 44,227,264,260,253,145,  0,  0,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,  0,173,251,208,158,218,239,163,  0,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,120,245,236, 92,  0, 52,201,227, 98,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,184,256,192,  0,  0,  0, 65,205,213, 40,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,192,250,146,  0,  0,  0, 70,206,225, 42,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,173,247,232,186,181,199,240,249,178,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0, 39,140,201,226,230,232,233,184, 65,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,0,0,0,0,0,0};

模型.h：

//MPU6050_model.ino
#include 
#include "tensorflow/lite/micro/micro_error_reporter.h"
#include "tensorflow/lite/micro/micro_interpreter.h"
#include "tensorflow/lite/micro/micro_mutable_op_resolver.h"
#include "tensorflow/lite/schema/schema_generated.h"
#include "tensorflow/lite/version.h"
#include "model.h"
#include "num.h"


const tflite::Model*  tflModel = nullptr; 
tflite::ErrorReporter*  tflErrorReporter = nullptr; 
TfLiteTensor* tflInputTensor = nullptr;  
TfLiteTensor* tflOutputTensor = nullptr; 
tflite::MicroInterpreter* tflInterpreter = nullptr; 

constexpr int tensorArenaSize = 140 * 1024; 
uint8_t tensorArena[tensorArenaSize];
float out[10];

void setup() {

  Serial.begin(115200);
  while (!Serial)
    delay(10);
     
  
  static tflite::MicroErrorReporter micro_error_reporter; 
  tflErrorReporter = µ_error_reporter;

   tflModel = tflite::GetModel(model);
   if (tflModel->version() != TFLITE_SCHEMA_VERSION) {
   TF_LITE_REPORT_ERROR(tflErrorReporter,
        "Model provided is schema version %d not equal "
        "to supported version %d.",
        tflModel->version(), TFLITE_SCHEMA_VERSION);
    return;
  }

  static tflite::MicroMutableOpResolver<6> micro_op_resolver;
  micro_op_resolver.AddMaxPool2D();
  micro_op_resolver.AddConv2D();
  micro_op_resolver.AddDepthwiseConv2D();
  micro_op_resolver.AddFullyConnected();
  micro_op_resolver.AddReshape();
  micro_op_resolver.AddSoftmax();

  static tflite::MicroInterpreter static_interpreter(tflModel, micro_op_resolver, tensorArena, tensorArenaSize, tflErrorReporter);
  tflInterpreter = &static_interpreter;

  TfLiteStatus allocate_status = tflInterpreter->AllocateTensors();
  if (allocate_status != kTfLiteOk) {
    TF_LITE_REPORT_ERROR(tflErrorReporter, "AllocateTensors() failed");
    return;
  }
  tflInputTensor = tflInterpreter->input(0);
  

}

void test_func(){
  for(int i = 0; i < 28; i++){
    for(int j =0; j < 28; j++){
      tflInterpreter->input(0)->data.f[28*i+j] = num[28*i+j] / 255;
    } 
  }
   for(int i = 0; i < 28; i++){
    for(int j =0; j < 28; j++){
      Serial.print(tflInterpreter->input(0)->data.f[28*i+j]);
      Serial.print(", ");
    } 
      Serial.println("");
  }
 Serial.println("");
  for(int i = 0; i < 28; i++){
    for(int j =0; j < 28; j++){
      Serial.print(num[28*i+j]);
      Serial.print(", ");
    } 
      Serial.println("");
  }
  Serial.println("");
  for(int i = 0; i < 28; i++){
    for(int j =0; j < 28; j++){
      Serial.print(tflInterpreter->input(0)->data.f[28*i+j]-num[28*i+j]);
      Serial.print(", ");
    } 
      Serial.println("");
  }
  */
  
}
void loop() {
  
}

代码说明：输入张量：

for(int i = 0; i < 28; i++){
  for(int j =0; j < 28; j++){
      tflInterpreter->input(0)->data.f[28*i+j] = num[28*i+j] / 255;
    } 
  }

为了测试输入张量，我使用 2D 循环发送输入数据。

for(int i = 0; i < 28; i++){
  for(int j =0; j < 28; j++){
      Serial.print(tflInterpreter->input(0)->data.f[28*i+j]);
      Serial.print(", ");
    } 
      Serial.println("");
  }
Serial.println("");

然后，我打印出存储在 TinyML 模型的输入张量中的值。

for(int i = 0; i < 28; i++){
  for(int j =0; j < 28; j++){
      Serial.print(num[28*i+j]);
      Serial.print(", ");
    } 
      Serial.println("");
  }
Serial.println("");

然后我打印出存储在循环中的实际值。

for(int i = 0; i < 28; i++){
  for(int j =0; j < 28; j++){
      Serial.print(tflInterpreter->input(0)->data.f[28*i+j]-num[28*i+j]);
      Serial.print(", ");
    } 
      Serial.println("");
  }

最后，我打印出存储在输入张量中的值与存储在数组中的值之间的差异。如果所有差异都为零，则输入已按照我们想要的方式正确存储在输入张量中。

10.b TinyML 模型：模型测试

本小节的 Github 链接。

现在我们已经弄清楚了如何发送输入数据，是时候测试模型了。这段代码与上面的代码相同，只是调用了推理并打印了输出张量。

num.h 文件：

float num[784] = {0,0,0,0,0,0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,  0, 49,143,223,196,149, 73,  0,  0,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,126,228,252,257,252,248,242,193, 67,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,176,247,254,213,156,149,175,236,256,204, 53,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,119,246,248,156,  0,  0,  0,  0, 69,216,259,221, 50,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,166,246,160,  0,  0,  0,  0,  0,  0,107,225,259,177,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,115,229,234, 86,  0,  0,  0,  0,  0,  0,  0,142,252,209,0,0,0,0,0,0,
0,0,0,0,0,0,107,223,230,214,237,192, 50,  0,  0,  0,  0,  0,  0,124,245,186,0,0,0,0,0,0,
0,0,0,0,0,0,201,251,147, 44, 95,154,127,  0,  0,  0,  0,  0,116,224,235, 91,0,0,0,0,0,0,
0,0,0,0,0,0,192,254,178, 89,  0,  0,  0,  0,  0,  0,  0, 80,224,242,149,  0,0,0,0,0,0,0,
0,0,0,0,0,0, 67,227,256,244,190, 94,  0,  0,  0,  0, 82,218,248,163,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0, 91,210,245,244,227,184, 90,  0, 84,219,256,188, 38,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0, 76,114,127,201,234,231,244,263,218, 74,  0,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,  0, 47,205,266,273,250, 92,  0,  0,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,  0, 44,227,264,260,253,145,  0,  0,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,  0,173,251,208,158,218,239,163,  0,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,120,245,236, 92,  0, 52,201,227, 98,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,184,256,192,  0,  0,  0, 65,205,213, 40,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,192,250,146,  0,  0,  0, 70,206,225, 42,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,173,247,232,186,181,199,240,249,178,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0, 39,140,201,226,230,232,233,184, 65,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,0,0,0,0,0,0,
0,0,0,0,0,0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,0,0,0,0,0,0

草图：

//MPU6050_model.ino
#include 
#include "tensorflow/lite/micro/micro_error_reporter.h"
#include "tensorflow/lite/micro/micro_interpreter.h"
#include "tensorflow/lite/micro/micro_mutable_op_resolver.h"
#include "tensorflow/lite/schema/schema_generated.h"
#include "tensorflow/lite/version.h"
#include "model.h"
#include "num.h"


const tflite::Model*  tflModel = nullptr; 
tflite::ErrorReporter*  tflErrorReporter = nullptr; 
TfLiteTensor* tflInputTensor = nullptr;  
TfLiteTensor* tflOutputTensor = nullptr; 
tflite::MicroInterpreter* tflInterpreter = nullptr; 

constexpr int tensorArenaSize = 140 * 1024; 
uint8_t tensorArena[tensorArenaSize];
float out[10];

void setup() {

  Serial.begin(115200);
  while (!Serial)
    delay(10);
     
  
  static tflite::MicroErrorReporter micro_error_reporter; 
  tflErrorReporter = µ_error_reporter;

   tflModel = tflite::GetModel(model);
   if (tflModel->version() != TFLITE_SCHEMA_VERSION) {
   TF_LITE_REPORT_ERROR(tflErrorReporter,
        "Model provided is schema version %d not equal "
        "to supported version %d.",
        tflModel->version(), TFLITE_SCHEMA_VERSION);
    return;
  }

  static tflite::MicroMutableOpResolver<6> micro_op_resolver;
  micro_op_resolver.AddMaxPool2D();
  micro_op_resolver.AddConv2D();
  micro_op_resolver.AddDepthwiseConv2D();
  micro_op_resolver.AddFullyConnected();
  micro_op_resolver.AddReshape();
  micro_op_resolver.AddSoftmax();

  static tflite::MicroInterpreter static_interpreter(tflModel, micro_op_resolver, tensorArena, tensorArenaSize, tflErrorReporter);
  tflInterpreter = &static_interpreter;

  TfLiteStatus allocate_status = tflInterpreter->AllocateTensors();
  if (allocate_status != kTfLiteOk) {
    TF_LITE_REPORT_ERROR(tflErrorReporter, "AllocateTensors() failed");
    return;
  }
  tflInputTensor = tflInterpreter->input(0);
  

}


void loop() {
  
    
   for(int i = 0; i < 28; i++){
    for(int j =0; j < 28; j++){
      tflInterpreter->input(0)->data.f[28*i+j] = num[28*i+j]/255.0;
    } 
  }
  /*
   for(int i = 0; i < 1; i++){
    for(int j =0; j < 1; j++){
      Serial.print(tflInterpreter->input(0)->data.f[28*i+j]);
      Serial.print(", ");
    } 

  }
  */
  
  TfLiteStatus invokeStatus = tflInterpreter->Invoke();
  out[0] = tflInterpreter->output(0)->data.f[0];
  out[1] = tflInterpreter->output(0)->data.f[1];
  out[2] = tflInterpreter->output(0)->data.f[2];
  out[3] = tflInterpreter->output(0)->data.f[3];
  out[4] = tflInterpreter->output(0)->data.f[4];
  out[5] = tflInterpreter->output(0)->data.f[5];
  out[6] = tflInterpreter->output(0)->data.f[6];
  out[7] = tflInterpreter->output(0)->data.f[7];
  out[8] = tflInterpreter->output(0)->data.f[8];
  out[9] = tflInterpreter->output(0)->data.f[9];
  
  float maxVal = out[0];
  int maxIndex = 0;
  for(int k =0; k < 10;k++){
    if (out[k] > maxVal) {
         maxVal = out[k];
         maxIndex = k;
      } 
  }
  Serial.print("Number ");
  Serial.print(maxIndex);
  Serial.println(" detected");
  Serial.print("Confidence: ");
  Serial.println(maxVal);
  
  Serial.print(out[0]);
  Serial.print(",");
  Serial.print(out[1]);
  Serial.print(",");
  Serial.print(out[2]);
  Serial.print(",");
  Serial.print(out[3]);
  Serial.print(",");
  Serial.print(out[4]);
  Serial.print(",");
  Serial.print(out[5]);
  Serial.print(",");
  Serial.print(out[6]);
  Serial.print(",");
  Serial.print(out[7]);
  Serial.print(",");
  Serial.print(out[8]);
  Serial.print(",");
  Serial.println(out[9]);
  
}

代码说明：

TfLiteStatus invokeStatus = tflInterpreter->Invoke();

这些代码行对存储在输入张量中的数据调用推理。

out[0] = tflInterpreter->output(0)->data.f[0];
  out[1] = tflInterpreter->output(0)->data.f[1];
  out[2] = tflInterpreter->output(0)->data.f[2];
  out[3] = tflInterpreter->output(0)->data.f[3];
  out[4] = tflInterpreter->output(0)->data.f[4];
  out[5] = tflInterpreter->output(0)->data.f[5];
  out[6] = tflInterpreter->output(0)->data.f[6];
  out[7] = tflInterpreter->output(0)->data.f[7];
  out[8] = tflInterpreter->output(0)->data.f[8];
  out[9] = tflInterpreter->output(0)->data.f[9];

这些代码行访问输出张量并将它们存储在一个数组中以供以后使用。

float maxVal = out[0];
int maxIndex = 0;
for(int k =0; k < 10;k++){
  if (out[k] > maxVal) {
      maxVal = out[k];
      maxIndex = k;
    } 
  }
Serial.print("Number ");
Serial.print(maxIndex);
Serial.println(" detected");
Serial.print("Confidence: ");
Serial.println(maxVal);

这几行代码打印出输出值最高的类的类索引和置信度值。

Serial.print(out[0]);
  Serial.print(",");
  Serial.print(out[1]);
  Serial.print(",");
  Serial.print(out[2]);
  Serial.print(",");
  Serial.print(out[3]);
  Serial.print(",");
  Serial.print(out[4]);
  Serial.print(",");
  Serial.print(out[5]);
  Serial.print(",");
  Serial.print(out[6]);
  Serial.print(",");
  Serial.print(out[7]);
  Serial.print(",");
  Serial.print(out[8]);
  Serial.print(",");
  Serial.println(out[9]);

这些代码行打印出每个单独类的置信度值。

10.c MNIST：测试图像

本小节的 Github 链接。

您可以使用这些转换为 NumPy 数组的图像来测试您的 MNIST TinyML 模型。

 
 
 
poYBAGNVi-OAUnzlAAABrWxk7J0755.png
 
1 / 5
 
pYYBAGNVi-aAcpjwAACu4UTrhzo403.png
 

结论

我感谢我的 GSoC 导师 Paul Ruiz 在整个项目中对我的指导！

 


下载并关注上传者 低至0.43元/天 开通VIP 免费下载

声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !

'+ '

'+ '

'+ ''+ '
'+ ''+ ''+ '
'+ ''+ '' ); $.get('/article/vipdownload/aid/'+webid,function(data){ if(data.code ==5){ $(pop_this).attr('href',"/login/index.html"); return false } if(data.code == 2){ //跳转到VIP升级页面 window.location.href="//m.lene-v.com/vip/index?aid=" + webid return false } //是会员 if (data.code > 0) { $('body').append(htmlSetNormalDownload); var getWidth=$("#poplayer").width(); $("#poplayer").css("margin-left","-"+getWidth/2+"px"); $('#tips').html(data.msg) $('.download_confirm').click(function(){ $('#dialog').remove(); }) } else { var down_url = $('#vipdownload').attr('data-url'); isBindAnalysisForm(pop_this, down_url, 1) } }); }); //是否开通VIP $.get('/article/vipdownload/aid/'+webid,function(data){ if(data.code == 2 || data.code ==5){ //跳转到VIP升级页面 $('#vipdownload>span').text("开通VIP 免费下载") return false }else{ // 待续费 if(data.code == 3) { vipExpiredInfo.ifVipExpired = true vipExpiredInfo.vipExpiredDate = data.data.endoftime } $('#vipdownload .icon-vip-tips').remove() $('#vipdownload>span').text("VIP免积分下载") } }); }).on("click",".download_cancel",function(){ $('#dialog').remove(); }) var setWeixinShare={};//定义默认的微信分享信息，页面如果要自定义分享，直接更改此变量即可 if(window.navigator.userAgent.toLowerCase().match(/MicroMessenger/i) == 'micromessenger'){ var d={ title:'教程第3部分：带有OV7670摄像头模块的TinyML',//标题 desc:$('[name=description]').attr("content"), //描述 imgUrl:'https://'+location.host+'/static/images/ele-logo.png',// 分享图标,默认是logo link:'',//链接 type:'',// 分享类型,music、video或link，不填默认为link dataUrl:'',//如果type是music或video，则要提供数据链接，默认为空 success:'', // 用户确认分享后执行的回调函数 cancel:''// 用户取消分享后执行的回调函数 } setWeixinShare=$.extend(d,setWeixinShare); $.ajax({ url:"//www.lene-v.com/app/wechat/index.php?s=Home/ShareConfig/index", data:"share_url="+encodeURIComponent(location.href)+"&format=jsonp&domain=m", type:'get', dataType:'jsonp', success:function(res){ if(res.status!="successed"){ return false; } $.getScript('https://res.wx.qq.com/open/js/jweixin-1.0.0.js',function(result,status){ if(status!="success"){ return false; } var getWxCfg=res.data; wx.config({ //debug: true, // 开启调试模式,调用的所有api的返回值会在客户端alert出来，若要查看传入的参数，可以在pc端打开，参数信息会通过log打出，仅在pc端时才会打印。 appId:getWxCfg.appId, // 必填，公众号的唯一标识 timestamp:getWxCfg.timestamp, // 必填，生成签名的时间戳 nonceStr:getWxCfg.nonceStr, // 必填，生成签名的随机串 signature:getWxCfg.signature,// 必填，签名，见附录1 jsApiList:['onMenuShareTimeline','onMenuShareAppMessage','onMenuShareQQ','onMenuShareWeibo','onMenuShareQZone'] // 必填，需要使用的JS接口列表，所有JS接口列表见附录2 }); wx.ready(function(){ //获取“分享到朋友圈”按钮点击状态及自定义分享内容接口 wx.onMenuShareTimeline({ title: setWeixinShare.title, // 分享标题 link: setWeixinShare.link, // 分享链接 imgUrl: setWeixinShare.imgUrl, // 分享图标 success: function () { setWeixinShare.success; // 用户确认分享后执行的回调函数 }, cancel: function () { setWeixinShare.cancel; // 用户取消分享后执行的回调函数 } }); //获取“分享给朋友”按钮点击状态及自定义分享内容接口 wx.onMenuShareAppMessage({ title: setWeixinShare.title, // 分享标题 desc: setWeixinShare.desc, // 分享描述 link: setWeixinShare.link, // 分享链接 imgUrl: setWeixinShare.imgUrl, // 分享图标 type: setWeixinShare.type, // 分享类型,music、video或link，不填默认为link dataUrl: setWeixinShare.dataUrl, // 如果type是music或video，则要提供数据链接，默认为空 success: function () { setWeixinShare.success; // 用户确认分享后执行的回调函数 }, cancel: function () { setWeixinShare.cancel; // 用户取消分享后执行的回调函数 } }); //获取“分享到QQ”按钮点击状态及自定义分享内容接口 wx.onMenuShareQQ({ title: setWeixinShare.title, // 分享标题 desc: setWeixinShare.desc, // 分享描述 link: setWeixinShare.link, // 分享链接 imgUrl: setWeixinShare.imgUrl, // 分享图标 success: function () { setWeixinShare.success; // 用户确认分享后执行的回调函数 }, cancel: function () { setWeixinShare.cancel; // 用户取消分享后执行的回调函数 } }); //获取“分享到腾讯微博”按钮点击状态及自定义分享内容接口 wx.onMenuShareWeibo({ title: setWeixinShare.title, // 分享标题 desc: setWeixinShare.desc, // 分享描述 link: setWeixinShare.link, // 分享链接 imgUrl: setWeixinShare.imgUrl, // 分享图标 success: function () { setWeixinShare.success; // 用户确认分享后执行的回调函数 }, cancel: function () { setWeixinShare.cancel; // 用户取消分享后执行的回调函数 } }); //获取“分享到QQ空间”按钮点击状态及自定义分享内容接口 wx.onMenuShareQZone({ title: setWeixinShare.title, // 分享标题 desc: setWeixinShare.desc, // 分享描述 link: setWeixinShare.link, // 分享链接 imgUrl: setWeixinShare.imgUrl, // 分享图标 success: function () { setWeixinShare.success; // 用户确认分享后执行的回调函数 }, cancel: function () { setWeixinShare.cancel; // 用户取消分享后执行的回调函数 } }); }); }); } }); } function openX_ad(posterid, htmlid, width, height) { if ($(htmlid).length > 0) { var randomnumber = Math.random(); var now_url = encodeURIComponent(window.location.href); var ga = document.createElement('iframe'); ga.src = 'https://www1.elecfans.com/www/delivery/myafr.php?target=_blank&cb=' + randomnumber + '&zoneid=' + posterid+'&prefer='+now_url; ga.width = width; ga.height = height; ga.frameBorder = 0; ga.scrolling = 'no'; var s = $(htmlid).append(ga); } } openX_ad(828, '#berry-300', 300, 250);